Find out why you can't access a website or service on the Internet

Part 1: Analyze why you can't access a website

Connect Azure App Service to virtual network
Remove a few HTML structure faults found using weblint. Is there additional configuration we should do? It would be greatly helpful if you could clarify how to setup additional client keys. Select the one we made above and continue. We now recommend readers use easy-rsa to set up authentication, which is more secure and allows for any number of devices to be simultaneously connected. I remember myself documenting a related topic while I was in China for a one-year project. Ask your question anytime, anywhere, with no hassle.

Support the project

Subnet Mask issue in VPN

If traceroute isn't installed, make sure to install it on your instance. The arguments -T -p 80 -n perform a TCP-based trace on port Be sure that you have port 80 or the port that you are testing with open in both directions. A few timed-out requests are common, so watch for packet loss to the destination or in the last hop of the route. Packet loss that accumulates over several hops can also indicate a problem.

When troubleshooting network connectivity using traceroute , it's helpful to run the command in both directions, from the client to the server and then from the server back to the client. By default, hping3 sends TCP headers to the target host's port 0 with a winsize of 64 without any tcp flag on.

Performing packet captures on your EC2 instances present in multiple Availability Zones and your on-premises host when duplicating the issue helps to determine if there are any application or network layer issues on the VPN connection. Install tcpdump on your instance to perform packet captures.

Refer to your specific vendor documentation for instructions on how to check network devices for analysis and troubleshooting. Changing to solved my problem. You were a great help. I was struggling with my internet connection. This one worked perfectly. Thank you very much once again!!! Some take the payload including 28 bit headers and info, like Cisco.

With others you still need to add 28 bits to the maximum payload to get the correct MTU size. If you are looking for a way to do this from an external source to the outside of your router, automatically, you could try the following MTU test: I had severe latency and jitter issues until I changed the "auto" setting on the router to 'manual' at MTU for my Comcast cable connection. So far it seems to be super fast.

In my case, I had to set the MTU to fragmenting occurred above when doing the test noted on this page. This same issue has been noted by other users of Clear. I do have a Linksys router and for the life of me couldn't figure out why my upstream connection was so awful. Setting the MTU to manual and did the trick! Any feedback you provide is sent to the owner of this FAQ for possible incorporation, it is also visible to logged in users.

Can I get a 'bridged' connection from BellSouth? What is 'ping time'? Why do some speedtest results appear greater than the cap? What is meant by 'FastPath' and 'Interleaving'? I added a zone for example sag.

Your nslookup shows your Windows 7 computer is using The difference between ping and nslookup is that when ping is submitted to OS, the OS tried to resolve name from all possible way through lmhosts, hosts, dns, and total of 7 ways , but nslookup only resolves name from provided dns server. So the first step to do is Frank's approach, and if that works, but the same command without the IP of the DNS server doesn't, it means that your DNS server isn't used per default.

By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service , privacy policy and cookie policy , and that your continued use of the website is subject to these policies. Home Questions Tags Users Unanswered. Why is my DNS server timing out?

DNS request timed out. Behrooz A 16 1 2 4. If you've configured

Part 2: Troubleshoot connectivity issues

Request timed out when pinging my computer (from another) solved asus ping request timed out; solved High Ping Spikes and Request Timed Out; solved Ping promblem in cmd - request timed out; I'm. DNS request timed out means NSLookup submitted the query to the DNS server, but did not get a response.. It's possible the DNS server you queried was having a problem and couldn't reply. Network errors could be to blame as well. This indicates that the ICMP echo request sent off by ping did not elicit an ICMP echo reply from the destination within the timeout window of the ping application.